|
The Fluid Flo Percussor mobilizes lung sections
with harmonic chest vibrations and has been the work horse of hospital
chest physical therapy for over twenty-eight years. The Fluid Flo delivers
localized intensive treatment and
successfully clears a patient's lungs of mucus and plugs.
"The Fluid Flo is the easiest to use and most convenient mechanical
percussor on the market. It's small enough to travel room-to-room
and
has power to spare!".......R. Kuschinsky, RCP
- Fluid Flo mimics hand
clapping commonly used for CPT.
- Fluid Flo delivers deep,
smooth pulses.
- Fluid Flo is comfortable
and less fatiguing for patients and therapists.
- Fluid Flo is only 1.5 lbs. and
easy enough for anyone to use.
- Fluid Flo is reliable and
factory tested for over 1000 hours.
- Fluid Flo requires 50 PSI, 2
CFM gas or air
supply.
- Federal law restricts the device to sale by or on
the order
of a physician.
Med Systems provides complete, fast and
affordable percussor repair. Call 800-345-9061 for any sales or
service needs.
OPERATING INSTRUCTIONS
1. Connect FLUID FLO to appropriate gas source.
Model 2500 connects to DISS
medical oxygen, Model 2700
connects DISS medical
air, Model 2900 connects to air compressor with minimum output
of 50 PSI at 2 CFM. DO NOT USE
A FLOWMETER.
2. Place a towel between the patient and the
percussor.
3. Turn control knob counter clockwise to desired speed.
Do not exceed 2 turns. The force desired is
obtained by how firmly you press the FLUID FLO
to the patient.
4.
Gently
move the pulsing percussor over the patient's chest being careful not to
press too firmly.
5.
Alcohol wipe the percussor surfaces to clean.
 |
|
 |
FLUID FLO Percussor |
|
FLUID FLO 2500 with 10' hose |
AVAILABLE MODELS: 2500
with oxygen fitting and 10' hose
2700 with air fitting and 10' hose
2900 with compressor fitting and 30' hose |